Shanghai Zenith Co.,Ltd.

China Stone Crushing Machine , High Pressure Mill, Grinding Manufacturer

Home >> Grinding >> High Pressure Mill
High Pressure Mill

High Pressure Mill


Introduction of High Pressure Mill
At present, High Pressure Mill is mainly employed to grind the materials, whose hardness is middle and low. And the moisture of materials should be below 6%. Likewise, Moths hardness of materials should be below 9 grade and non-explosion and non-flammability. Our high pressure mill is a new machine which can mill fineness and ultra-powder. There are a wide range of materials those can be milled by our high pressure mill, such as: chalk, bentonite, potassium ore pumice, calcite, steatite, dolomite, mica limestone, kaolin, iolite, pyrophillite, graphite, meerschaum, fluorite, phosphate ore, vermiculite, attapulgite, diatomite, magnetite, barite, gypsum, alunite, etc. Moreover the size of finished product can be regulated between 325-2500.
Technical Parameter of High Pressure Mill

Model XZM215 XZM221 XZM227
Number of roller(piece) 15 21 27
Ring diameter(mm) Φ600 Φ800 Φ1000
Number of ring (piece) 2 2 2
main equipment rotate speed(r/min) 235 235 235
Max. inlet size(mm) <10 <10 <10
Final size (mesh) 325－2500 325－2500 325－2500
Capacity(kg/h) 350-2500 600－4000 900－6000
Overall size(m) 10×2×5.5 12.4×2.5×5.8 14.5×3.8×6.3
Note: If there is any change of above specification, it is all according to the booklet with machine.


Back

Add: No.877 Orient Rd, New Pudong Zone, Shanghai ,China Postal Code: 200122